设为首页 收藏本站
烽火社区 首页 方案 汽车电子 车身电子 查看内容
动力系统 底盘与安全 车身电子 车载娱乐 仪表车盘 车联网络

TITPS9263x-Q1三路汽车LED驱动和调光办理方案

2017-11-24 11:32 AM| 发布者: 久伴我心的海角| 查看: 1389| 评论: 0

摘要: TI公司的TPS9263x-Q1是具有模拟和PWM调光控制的三门路性LED驱动器,每路LED驱动电流高达150mA,输出可并联以到达450mA,每路的精度在±1.5%-±2.5%,输入电压5V-40V,符合AEC-Q100尺度,主要用在汽车LED照明如白天驾御 ...

TI公司的TPS9263x-Q1是具有模拟和PWM调光控制的三门路性LED驱动器,每路LED驱动电流高达150mA,输出可并联以到达450mA,每路的精度在±1.5%-±2.5%,输入电压5V-40V,符合AEC-Q100尺度,主要用在汽车LED照明如白天驾御灯,位置灯,雾灯,后灯,起停灯和内部照明.本京电港论坛文章先容了TPS92630-Q1主要特点,框架图,典范应用以及TPS92630-Q1评估模块(EVM)主要特点,电路原理图纸,质料清单和PCB线路板元件和铜线结构图.

The TPS9263x-Q1 devices are three-channel linear LED drivers with analog and PWM dimming control. Their full-diagnostic and built-in protection capabilities make them the ideal solution for variable-intensity LED lighting applications up to the medium-power range.

The design of this device suits it well for driving LEDs configured as a single string or multiple strings within its power capability. A single device can drive up to three strings with one to three LEDs in each string at a total current of up to 150 mA per channel. Outputs can be paralleled to provide higher current drive capability to 450 mA.

In multiple-string applications, the device offers the advantage of having common-cathode connection of the LED strings. So, there is only a single return wire needed instead of one per LED string that a system with low-side current sense would need.

A single-LED short comparator allows detection of single LED failing with a short circuit. Fault output can support bus connection topology between multiple ICs.

The included temperature monitor reduces the LED drive current if the IC junction temperature exceeds a thermal threshold. One can program the temperature threshold through an external resistor. One can disable the thermal current-monitor feature by connecting the TEMP terminal to ground. Output of the junction temperature as an analog voltage is available as a factory program option.

TPS92630-Q1主要特点:

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
Device Temperature Grade 1: C40℃ to 125℃ Ambient
Operating Temperature Range
Device HBM ESD Classification Level H2
Device CDM ESD Classification Level C3B
3-Ch. LED Driver With Analog and PWM Dimming
Wide Input-Voltage Range: 5 VC40 V
Adjustable Constant Output Current Set by Reference Resistor
Max. Current: 150 mA per Channel
Max. Current: 450 mA in Parallel Operation Mode
Accuracy: ±1.5% per Channel When I(IOUTx) > 30 mA
Accuracy: ±2.5% per Device When I(IOUTx) > 30 mA
Parallel Outputs for Higher Current Using
Multiple ICs or Multiple Channels of a Single IC
Low Dropout Voltage
Max. Dropout: 400 mV at 60 mA per Channel
Max. Dropout: 0.9 V at 150 mA per Channel
Independent PWM Dimming per Channel
Open and Shorted LED Detection With Deglitch Timer
LED String Voltage Feedback per Channel for Single-LED
Short Detection
Separate Fault Terminal for Single-LED Short Failure
Fault Terminal for Open, Short, and Thermal Shutdown
Failure Reporting, Allowing Parallel Bus Connection
up to 15 Devices
IC Accommodates a Slow Input-Voltage dV/dt (0.5 V/min)
With No Issues
Two Options for Device Temperature Information
TPS92630-Q1: Temperature-Current Foldback
to Prevent Thermal Shutdown, With Programmable Threshold
TPS92631-Q1: Analog Voltage Output Proportional to the Device
Temperature
Operating Junction Temperature Range C40℃ to 150℃
Package: 16-Terminal Thermally Enhanced PWP Package (HTSSOP)

TPS92630-Q1应用:

• Automotive LED Lighting Applications, Such As:
C Daytime Running Light
C Position Light
C Fog Light
C Rear Light
C Stop or Taillight
C Interior Lighting

图1{京电港论坛}. TPS92630-Q1功能框架图

图2{京电港论坛}.TPS92630-Q1两级亮度调解电路原理图纸

图3{京电港论坛}.两个TPS92630-Q1并联大负载驱动电路原理图纸(1)

图4{京电港论坛}.两个TPS92630-Q1并联大负载驱动电路原理图纸(2)

TPS92630-Q1评估模块(EVM)

The Texas Instruments TP92630EVM evaluation module (EVM) helps designers evaluate the operation and performance of the TPS92630-Q1. The TPS92630-Q1 is a three-channel linear LED driver with independent PWM dimming control. It is designed and well suited for driving multiple strings of red LEDs or a single string of white LEDs up to a medium power range. The TPS92630-Q1 IC is capable of operating at input voltages up to 40 V. Due to thermal considerations, the EVM may not allow an input voltage this high.

TPS92630-Q1评估模块(EVM)主要特点:



图5{京电港论坛}. TPS92630-Q1评估模块(EVM)外形实物图

图6{京电港论坛}. TPS92630-Q1评估模块(EVM)电路原理图纸
TPS92630-Q1评估模块(EVM)质料清单:



图6{京电港论坛}. TPS92630-Q1评估模块(EVM)PCB线路板结构图:顶层

图7{京电港论坛}. TPS92630-Q1评估模块(EVM) PCB线路板铜线结构图:顶层

图8{京电港论坛}. TPS92630-Q1评估模块(EVM)PCB线路板结构图:底层
详情请复制打开此衔接地址:
http://www.ti.com/lit/ds/slvsc76/slvsc76.pdf
和http://www.ti.com/lit/ug/slvua26/slvua26.pdf

slvsc76.pdf
slvua26.pdf


鲜花

握手

雷人

路过

鸡蛋

相关阅读

最新评论

热点图文
推荐阅读
文章排行
返回顶部